SIP Archives - UCPros

SIP 100 Trying Response Code for SIP Troubleshooting

Pasha Teplitsky — Mon, 16 Nov 2020 13:00:02 +0000

SIP 100 Trying response code is part of the 1XX SIP Response Codes and one of the most commonly used SIP response codes in the SIP stack. SIP works on a request-response model and 1xx SIP response codes are there to provide information on the status of network-related processes, SIP 100 Trying is one of … Continue reading SIP 100 Trying Response Code for SIP Troubleshooting

The post SIP 100 Trying Response Code for SIP Troubleshooting appeared first on UCPros.

SIP 404 Not Found – Understanding SIP 404 Response Code

Pasha Teplitsky — Mon, 09 Nov 2020 13:00:00 +0000

SIP 404 Not Found response belongs to the 4xx SIP code group.A group of SIP codes that indicate a request failure and constitutes a number of codes used by SIP for communicating errors and failures. In this blog post we will explore the SIP 404 Not Found response code and touch the different available SIP … Continue reading SIP 404 Not Found – Understanding SIP 404 Response Code

The post SIP 404 Not Found – Understanding SIP 404 Response Code appeared first on UCPros.

How To Properly Configure Cisco CUBE HA

Pasha Teplitsky — Fri, 23 Oct 2020 08:35:44 +0000

Cisco CUBE HA is becoming more prevalent with the CSR1000 or vCUBE, therefore with its popularity, learning how to configure Cisco CUBE HA has become an essential skill that UC engineers should have. General Overview of Cisco CUBE HA Cisco CUBE HA provides preservation of: Transcoded calls Media and Signaling for Active Calls Calls in … Continue reading How To Properly Configure Cisco CUBE HA

The post How To Properly Configure Cisco CUBE HA appeared first on UCPros.

Cisco SIP SRST Configuration

Pasha Teplitsky — Wed, 07 Oct 2020 13:00:00 +0000

Cisco SIP SRST Configuration is the process of providing backup to external SIP Call control (IP-PBX) through the provision of the basic registrar and re-direct server or back-to-back user agent (B2BUA) services. In this blog post, we will provide you with a step by step process that outlines a Cisco SIP SRST Configuration. There are … Continue reading Cisco SIP SRST Configuration

The post Cisco SIP SRST Configuration appeared first on UCPros.

Configuring Options Ping on CUBE

Pasha Teplitsky — Sat, 03 Oct 2020 13:00:00 +0000

Step by step guide to configuring options Ping on CUBE. Learning how to busy out a dial-peer when a SIP trunk goes down. SIP Options Ping on CUBE.

The post Configuring Options Ping on CUBE appeared first on UCPros.

Using Wireshark SIP Analysis for VoIP scenarios

adilmeer — Sun, 15 Mar 2020 17:39:19 +0000

Troubleshooting VoIP issues can be troublesome. When something goes wrong, the lack of direct visibility as to what is occurring on the network with SIP and RTP packets can initially be intimidating to network and voice engineers. However, Wireshark SIP analysis turns ordinary engineers into superheroes, allowing them to see deep into the network and … Continue reading Using Wireshark SIP Analysis for VoIP scenarios

The post Using Wireshark SIP Analysis for VoIP scenarios appeared first on UCPros.

SIP Response Codes Explained

Pasha Teplitsky — Sat, 08 Jun 2019 15:59:26 +0000

Why don’t we start with some trivia?Did you know that SIP response codes are based on HTTP/1.1 response codes? Actually, SIP response codes are the extent of the original HTTP ones and even define a new class with more response codes. I’ll let you know which one when we get to it. That said, not … Continue reading SIP Response Codes Explained

The post SIP Response Codes Explained appeared first on UCPros.

Cisco SIP Gateway configuration: The Ultimate Guide

Pasha Teplitsky — Tue, 04 Dec 2018 22:23:40 +0000

Connecting the Cisco IOS Voice Gateway to CUCM via SIP has been the preferred way to do it in the past couple of years. The slowly dying H323 protocol (ISDN based) is not being developed anymore while SIP (HTTP based) became the industry standard for VoIP. So whenever PSTN connection is implemented via an IOS … Continue reading Cisco SIP Gateway configuration: The Ultimate Guide

The post Cisco SIP Gateway configuration: The Ultimate Guide appeared first on UCPros.

How to punch SIP One Way Audio in the face

Pasha Teplitsky — Sun, 29 Jul 2018 15:05:21 +0000

And why should you punch it in the face?To be honest, mostly revenge…Because one-way audio and no audio problems hurt.Really bad.Especially when they hit you by surprise, as they usually do. The thing is, I used to think that if we have signaling and the call is up,the audio part should be obvious. Even more … Continue reading How to punch SIP One Way Audio in the face

The post How to punch SIP One Way Audio in the face appeared first on UCPros.

CUCM SIP Call Flow Troubleshooting

Pasha Teplitsky — Sun, 20 May 2018 14:54:33 +0000

There is no way around it,finding the SIP call flow is the first thing you have to do when you are facing a SIP call failure. Why?Easy.Because first of all, you have to understand whether this is a call routing problem or signaling/media compatibility issue.SIP call flow helps you understand just that, and in a … Continue reading CUCM SIP Call Flow Troubleshooting

The post CUCM SIP Call Flow Troubleshooting appeared first on UCPros.