SIP Troubleshooting for Cisco Collaboration
SIP Troubleshooting for Cisco Collaboration
this is not easy.
I struggled with the same issues.
Being assigned to a fault,
not knowing where to begin,
which device to check,
what commands to use,
What does the log and debug output mean?
Hours on hours of spent time on guesswork,
upset customers and disappointed bosses.
But it doesn’t have to be this way.
Because these are the exact reasons I created this course.
Imagine stop stressing out over a ringing phone from a customer,
approaching a fault with confidence, being able to find and fix it quickly.
Being one of the few who can find root cause analysis and spot architectural flaws.
How valuable would you think this will make you to your company? The customer? The market..?
This is how you can be better than a CCIE.
Would you agree that Unified Communications is evolving,
and SIP is by far the most used protocol in Cisco UC Architecture?
CUCM, CUBE, IP Phones, Gateways, CMS, WebEx, IM&P.
ALL USE SIP.
None the less, for some reason, the majority of us UC engineers never caught up and still treat it like a distant relative.
You heard me. The untouchable CCIEs.
Have doubts? Just visit a CCIE study group and see for yourself.
You want to dominate SIP? Stand out from the crowd? Become a Pro?
This course is for you.
Here is what you get when you join the course:
The foundations of the course are almost 6 hours of video lessons, where i will personally guide you through each of the key steps to understand how SIP works.
There are three modules, each broken into concise lessons that you can study at your own pace.
The content is focused on how to build up your skills,
from the very start to an expert level that will allow you to loom when SIP is involved.
Once you enroll you will have immediate unlimited access to all course material.
This is a theoretical module that will teach you all you need to know about SIP:
This is the gateway module between the theoretical knowledge and the troubleshooting scenarios.
Here you will learn how to:
This is full blown module with real–life troubleshooting scenarios that will:
Want to repeat my mistakes? Here is how.
I’m no different than you,
my beginning was rough.
My UC skills were non-existent and I had to pave my way through the birth of my UC career brick by brick.
My mother always jokes (at least I hope she does) about me being a mule.
She might be right though, I wasn’t lazy and my main skills were hard work and a lot of brute force.
Sounds pretty much like a mule to me..
And not a very smart mule either.
When troubleshooting faults I would try to read the logs, decipher it, look for logic and familiar words that would provide some clues and get me out of the mud.
Let me tell you, those bricks were heavy, especially when the faults were critical and the phone just wouldn’t stop ringing.
My progress was slow and I had to learn the hard way to use the smart way.
Once I started to take the time and effort, invested in my career and actually studied the technology instead of trying to reverse engineer it, my progress graph went off the charts. Fast.
I finished projects with ease and there was no troubleshooting scenario I found frightening.
I gained the respect of my colleagues, my customers and my managers who were more then eager to keep me happy.
I was paid for my CCIE, got two salary raises in one year and today I have the privilege enjoy my work as an Independent Consultant and master my time, income and life.
Mastering SIP was clearly one of the quantum leaps of my career.
Don’t be mistaken though, it’s not going to be easy.
If you want to achieve mastery, you will have to work hard,
go through the course with focus and diligence and often repeat lessons in order to fully grasp
the concepts and reap the benefits.
Purchase today, go through all the materials, evaluate everything for yourself, and if you’re not absolutely delighted with the course, email us within 30 days for a full refund.
You don’t even have to tell us why.
We know that not every course fits every learner, and we never want you to be unhappy with a purchase. So if you get into the course and decide it’s not a good fit, just let us know within 30 days, and we’ll be happy to refund every penny you’ve paid.
YOUR LONG TERM INVESTMENT IN YOUR CAREER IS ONLY
The main portion of the course consists of ~6 hours of in depth, recorded video lessons.
It also includes the required documents such as a lab guide, flow charts, etc. which you will be able to download.
The course consists of ~6 hours of video lessons which are self-paced.
You get lifetime access to the materials and can watch them anytime, anywhere.
I also recommend going over module 1 (SIP Theory) again after completing module 3.
This is the moment everything clicks and your brain rewires
The second part is the lab challenge, which can take several days to accomplish. You’re gonna love it.
If you have ever configured a SIP Trunk on CUCM and know how to navigate Cisco IOS you are good to go 🙂
For support issues or questions , Please email us at support@localhost
Copyright © 2019 UCPros.net. All Rights Reserved.